sale@s-laser.com +86-29-68590616
How to choose high-quality laser bullets?

How to choose high-quality laser bullets?

Aug 13, 2020

Dry-fire training isn’t a new concept. Police officers, the military and special ops teams have been using dry-fire training to improve their shootings skills for years. As new coronavirus epidemic spreads and spreads globally, many countries have declared a state of emergency, a high-quality laser training bullet that allows you to practice your shooting skills safe, fun and effective dry-fire training at home without the need for live ammunition.


图片 1 

 

Let’s know how to choose a high-quality laser training bullet, laser caliber, laser cartridge or laser training simulator.

 

All units laser bullet are made of brass, stainless steel or aluminum alloy, and its surface is passivated or gilded, the top wire hole is provided with four and arranged crosswise on the laser bullet shell. In addition, all devices have two O-rings that not only assist in barrel protection, but also assure a better fit to allow a more accurate shot.

 Laser Bullet示意图

To main test each caliber to determine reliability and suitability for use with the targets. Each cartridge was tested to confirm wavelength compatibility, pulse duration, and normal use in an actual firearm.

 

1. Wavelength Compatibility

 

To make sure each of the cartridges perform at the expected wavelength and are fully compatible with the targets.

 

2. Pulse Duration

 

The pulse duration of each laser cartridge is measured using an electronic test fixture and tested for compatibility with your targets. Again, each laser is manually activated using a blunt plastic-covered tool for repeatability to have the averages results of 10 measurements for each cartridge.

 

Two circuit modes for laser cartridge or customized also available:

 

1). The laser will turn on when the trigger is pulled and will keep on when the firing-pin press of the end cap. This circuit mode is suitable for most firearms.

 

2). The laser will turn off after 50 milliseconds or 80 milliseconds once the firing-pin release the end cap. This circuit is suitable for firearms which with hard firing needles, such as most rifles.

 

3. Normal Use In Actual Firearms

 

Although the real Laser “bullet” has a power of <5mW, Class IIIA, it is the strongest non-harmful laser. Meaning, it will not burn your skin or have a fire hazard.

Select the appropriate caliber for your pistol. Requires three LR626 batteries (included). Test each of the cartridges in an actual firearm under normal use condition.

The back of the laser bullet has a rubber button pad that safely absorbs the impact of the firing pin and triggers the laser to strike when the gun is fired.

 

图片 8 

 

The laser cartridge fits precisely into the chamber of your weapon of choice, it could be activated at all and get a bright, normal-looking pulse which works well in your target, again, make sure the point of laser impact align with the sights.


图片 9 

 

The training efficiency of shooting and aiming is very high. As long as you pull the trigger, a firing-pin activated switch allows the red laser to indicate the impact of the bullet with a bright red dot to the target. You can see the consistency of pulling the trigger and the accuracy of aiming.

 

Elite’s laser bullet is available in the most popular calibre types, including 9 mm, .380 ACP, .40 S&W, .45 ACP, .38 Special, .357 Sig and .233/5.56. The laser bullet is designed without a rim, so the bullet doesn’t get ejected after firing. The bullet is 100% safe for your firearm, and will not damage the weapon during use. Still, we have over 40 calibers available, together with replacement spare part switches or End-Caps. Please contact us at emily@s-laser.com if we can be of further assistance for this laser bullet.